IZER - IRON DECONTAMINATION

IZER — pH-Neutral Iron & Fallout Remover

See the contamination — then watch it dissolve.

Brake dust and iron fallout are invisible to the naked eye but bonded to every surface on your car — embedding into paint, wheels, chrome, and metal components with every kilometre driven. Regular washing cannot remove them. IZER can. Vonixx's pH-neutral iron decontaminant chemically reacts with ferrous contamination on contact, turning it purple as it dissolves it — giving you a visible confirmation that the product is working, and leaving surfaces genuinely decontaminated rather than just clean.

An essential step in any proper decontamination process — for wheels, paint, chrome, and engine components.

Why You'll Love It

Visible colour-change reaction — When IZER contacts ferrous contamination, it reacts chemically and changes colour from clear to purple or dark red — giving you a clear, visible indication of exactly where contamination is present and that the product is actively dissolving it. No colour change means no contamination — the feedback is built into the product.

pH neutral — safe on all surfaces — Unlike acidic iron removers, IZER's pH-neutral formula is safe for use on paint, wheels (including alloy, chrome, piano black, and steel), chrome surfaces, and engine components — without the risk of etching or damage associated with acidic alternatives.

Removes brake dust and iron fallout from wheels — Effectively dissolves the oxidised brake dust and iron fallout that bond to wheel surfaces and are impossible to remove with standard wheel cleaners alone.

Removes iron contamination from paint — Can be used on paint at up to 1:1 dilution to remove embedded iron fallout that causes paint surface roughness — an important step before clay barring or ceramic coating application.

Also removes rust — Effective at removing rust spots from chrome and common iron surfaces.

Renews engine metal components — Used in the engine bay to assist in removing oxidation from metal parts, leaving engine components looking cleaner and renewed.

Also works on bicycle wheels — Suitable for any ferrous decontamination task on vehicles.

Ready to use — No dilution required for wheels and most surfaces. Dilutable up to 1:1 for paint decontamination. Available in 500ml, 1.5L, and 3L.

How to Apply

1. Ensure the surface is completely cold before starting — never apply to heated surfaces or in direct sun.
2. Spray a small amount of IZER evenly onto the surface to be decontaminated.
3. Allow to dwell for 2 to 3 minutes and observe the colour change to purple or dark — this confirms ferrous contamination is present and being dissolved.
4. Using a wheel brush, detailing brush, or microfibre wash mitt, agitate uniformly across the surface to assist in the complete removal of contamination.
5. Rinse immediately and thoroughly with a pressure washer until all product and dissolved contamination is completely removed.
6. Repeat if contamination is severe.

For paint decontamination: Dilute up to 1:1 with water before applying. Note: even after IZER treatment, clay bar decontamination with V-LUB is still recommended for complete paint surface preparation.

⚠️ Important: Always apply to cold surfaces — never in direct sunlight or on warm surfaces. Not recommended for use on galvanised surfaces. The strong odour is characteristic of the product and does not cause harm with normal use. On common iron surfaces, the product will remove rust but the area will need to be protected afterwards.

IZER is a Vonixx product, available exclusively in Australia through WASHP.