V10 - CUTTING COMPOUND

V10 — Cutting Compound for Soft Asian Clear Coats

Precision cutting for soft clear coats — with an exceptional finish.

Not all clear coats are the same — and using the wrong compound on a soft Asian-formula clear coat can do more harm than good. V10 was developed by Vonixx with an exclusive formula specifically engineered for soft Asian clear coats, delivering controlled, precise cutting power to remove P1200 to P1500 sanding marks, deep scratches, and oxidation — while maintaining an excellent level of finish and shine throughout the process.

Works on paint, chrome surfaces, and piano black finishes.

Why You'll Love It

Specifically formulated for soft Asian clear coats — V10's exclusive formula is precisely matched to the characteristics of soft Asian-formula varnishes, delivering the right level of cut without over-abrading the surface — essential for correct results on these paint types.

Removes P1200 to P1500 sanding marks — Effectively eliminates sanding marks from P1200 to P1500 grit, as well as deep scratches and oxidation on neglected paintwork.

Controlled cut with excellent finish — Maintains a consistently controlled level of cut throughout the polishing process, delivering an excellent level of finish and shine — reducing the work needed in subsequent refinement steps.

Extended working time — won't clog — Can be worked for extended periods without clogging or balling up on the pad or paint surface, allowing thorough correction before the product needs to be refreshed.

Low dust formation — Minimal residual dust generated during the polishing process — keeping your work area and the vehicle cleaner.

Suitable for paint, chrome, and piano black finishes — Versatile enough for multiple exterior surfaces beyond just paint.

500ml ready to use — No dilution required.

How to Apply

1. Shake well before use and clean the surface thoroughly before starting.
2. Use a polishing machine with a cutting pad at the recommended speed settings:
   • Rotary polisher: 1,200 to 1,400 RPM, light to moderate pressure
   • Roto-orbital polisher: 2,800 to 3,520 RPM
3. Apply a sufficient amount of product to work one area at a time — approximately 50cm x 50cm.
4. Polish with crossed, overlapping passes until the product forms a thin, transparent layer on the surface and the desired level of correction is achieved.
5. Remove any excess product with a clean microfibre towel. Repeat if necessary.

Recommended pad: Vonixx Voxer Wool Cutting Pad for best results on this compound.

⚠️ Important: V10 is formulated exclusively for soft Asian clear coats. Not suitable for use on plastic, leather, or glass. Can be used on freshly painted surfaces after a minimum of 30 days curing time.

V10 is a Vonixx product, available exclusively in Australia through WASHP.