BLEND - ALL IN ONE POLISH

BLEND ALL IN ONE — Single-Step Polish with Carnaúba & SiO₂ Protection

Correct, shine, and protect in a single pass — the most versatile product in the BLEND range.

Most detailing jobs require separate products for polishing, finishing, and protecting. BLEND All In One eliminates that complexity entirely. A single-step polishing compound that combines the correction power of a medium-cut polish, the warm depth of pure Brazilian carnaúba, and the ceramic resistance of SiO₂ — in one product that can be applied by hand or machine and leaves the paint corrected, shining, and protected for up to 4 months. All from a single pass.

Why You'll Love It

Single step — corrects, shines, and protects — BLEND All In One combines polishing correction, carnaúba gloss, ceramic SiO₂ resistance, and water-repellent protection in one product and one application stage — simplifying the detailing process without compromising on results.

High cutting power — Effectively eliminates medium to severe swirl marks and surface defects comparable to P2000 or finer sanding marks — genuine correction power in a product that also finishes and protects.

Excellent finish — Despite its cutting power, BLEND All In One leaves an excellent surface finish — not just a corrected surface, but a genuinely refined one with deep gloss and clarity.

Carnaúba warmth and depth — Contains pure Brazilian carnaúba wax that delivers the warm, rich, deep gloss characteristic of premium carnaúba products — not just correction and protection, but a beautiful result.

Ceramic SiO₂ resistance — The SiO₂ component adds genuine ceramic-grade resistance and hardness to the protective layer, significantly extending durability beyond conventional one-step polishes.

Up to 4 months of protection — After polishing, the carnaúba and SiO₂ components provide up to 4 months of durable paint protection and water repellency — the surface is protected from the moment polishing is complete.

Significant water beading effect — Creates a strong hydrophobic layer that causes water to bead and roll off the paint — visible water repellency from a polishing compound.

Apply by hand or machine — Effective both by hand with a foam applicator for light correction and maintenance, or by polishing machine for more intensive correction work.

Ready to use — No dilution required. 500ml.

How to Apply

By machine (recommended for best correction results):

1. Shake the product well before use.
2. Apply 4 to 5 drops of BLEND All In One to the polishing pad and spread evenly across the area to be worked before switching on the machine.
3. Polish one area at a time — no larger than 60cm x 60cm — using a rotary polisher at 800 to 1,800 RPM, or a dual-action polisher at 3,000 to 4,800 OPM.
4. Wipe off the residue with a clean, soft microfibre towel. Repeat if needed for more correction.

Pad selection tip: For most correction work, a medium-cut foam pad delivers excellent results. For more severe defects, use a more aggressive pad — but follow up with a medium-cut pad pass before removing product.

By hand: Apply a small amount to a foam applicator and work into the paint surface using circular movements. Remove with a clean microfibre towel.

Water beading test: Allow at least 1 hour after application before testing water repellency.

Maintenance: To maintain protection and shine between full polish sessions, apply BLEND Ceramic & Carnaúba Spray Wax after each wash.

BLEND All In One is a Vonixx product, available exclusively in Australia through WASHP.