V-PAINT PRO - CERAMIC COATING

V-PAINT PRO - is a ceramic coating for paint with a durability of up to 2 years, developed with silicon molecules that coat the vehicle surface, forming a high-resistance nanotechnological barrier. V-Paint promotes hydrophobicity, UV protection, and deep shine. The nanofilm formed on the paint minimizes harmful effects from tree sap, bird droppings, solar rays, salt spray, acid rain, and even micro-scratches caused by poorly executed washes, preventing premature paint wear.

Dilution:
Ready to use.

Recommended Use:
Paint and wheels.

Durability:
Up to 2 years.

Curing Time:
Partial: 12 hours.
Total: 72 hours.

During the first 6 days, silica-based coatings tend to form water marks composed of calcium and magnesium salts when exposed to rain or mud. To minimize this effect and prevent these drops from marking the paint, it is recommended to apply SIO2-Pro four days after applying V-Paint. The product minimizes water mark effects, leaves a velvety touch and high gloss, extending the life of the vitrified layer.

Additional Information:
Follow all instructions on the product label and box rigorously to ensure excellence and high durability. Keep the packaging closed to prevent product solidification. V-Paint can be used on alloy rims. Yield: 20ml for 1 to 2 cars. We do not recommend applying V-Paint on leather, plastic, headlights, taillights, or glass.

Usage and Maintenance Tips:
- Always wash the vehicle in the shade using V-Floc and a microfiber glove.
- Use SIO2-Pro every 30 or 45 days to help maintain shine, leave the paint with a velvety touch, and increase longevity.
- Do not use acidic, basic, or solvent-based products.
- Perform the first wash only 6 days after product application.
- If exposed to rain before complete curing, dry the vehicle with a drying towel.
- Avoid using cleaning waxes on the vitrified layer, as the abrasives in these waxes may remove the coating.
- If the vehicle is washed with artesian well water, dry thoroughly to avoid possible stains caused by calcium and magnesium salts in the water, then apply Sio2-Pro.
- In case of nozzle clogging, reopen the hole with a clip or needle; wash the applicator immediately after use to prevent solidification.

- Protection for up to 2 years.
- Silicon-based product.

How to Use:
1. Ensure the paint is in perfect condition and free of scratches.
2. Apply the product using the applicator included in the packaging, wrapped in suede microfiber. Begin applying with cross motions in an area not exceeding 80cm x 80cm until fully covered.
3. Finish with a clean, dry microfiber towel until the desired shine is achieved. Finish with an ultra-fine finishing cloth.
4. Repeat the process until the entire vehicle is completed. In case of stains, reapply the product to the stained area and remove within 1 minute.

Recommendations:
Washing and maintaining suede:
- Spray a good amount of Revelax on the applicator and microfiber to solubilize the product.
- Add a few drops of Microlav to the applicator and microfiber.
- Rub well.
- Rinse afterward.
- Dry in the shade.

Precautions:
Caution! Dangerous if ingested. Avoid prolonged skin contact. Wash hands after use. Keep out of reach of children and pets.